Select Page

Wallin Help Center

Raspberry Player Installation

You are here:

 

After downloading the image with the link we have provided, you need to flash it on the microSD card.

You can use any software you want, but we recommend using Raspberry Pi Imager.

You can download it here:

Raspberry Pi Downloads – Software for the Raspberry Pi

 

This software is very easy to use, you only need to select the downloaded image:

  •           – click on the  “Choose OS” button
  •           – select “Use custom image” (it’s usually the last option on the list)

 

Then you need to select the microSD with the “Choose SD Card” button and finally you can write the image on the card by clicking on the “Write” button.

The process usually takes a few minutes, but could be longer depending on your system configuration.

Once the write process is finished you can insert the card into the Raspberry Pi 4 and turn it on.

WallSign player will automatically start a few seconds after the system boot.

 

N.B.

It’s usually recommended to update the WallSign player installed with the image by using the WallSign Dashboard.

Was this article helpful?
How can we improve this article?
Table of Contents

Do you need support?

Write an email to: support@wallin.tv or open a ticket here.